Implementing Cisco Unified Communications Manager, Part 2 (CIPT2 v9.0)

Request a Quote for this class

About this Course

Implementing Cisco Unified Communications Manager, Part 2 (CIPT2) v8.0 prepares you for implementing Cisco Unified Communications solution in a multisite environment. It covers globalized call routing, Cisco Service Advertisement Framework (SAF) and Call Control Discovery (CCD), tail-end hop-off (TEHO), Cisco Unified Survivable Remote Site Telephony (SRST), and mobility features such as Device Mobility and Cisco Extension Mobility. You will apply a dial plan for a multisite environment including TEHO, configure survivability for remote sites during WAN failure, and implement solutions to reduce bandwidth requirements in the IP WAN. You will also enable Call Admission Control (CAC), including Session Initiation Protocol (SIP) Preconditions and automated alternate routing (AAR).

At Course Completion

Upon completing this course, the student will be able to meet these overall objectives:

  • Describe multisite deployment issues and solutions, and describe and configure required dial plan elements
  • Implement call-processing resiliency in remote sites by using Cisco Unified SRST, MGCP fallback, and Cisco Unified Communications Manager Express in Cisco Unified SRST mode
  • Implement bandwidth management and CAC to prevent oversubscription of the IP WAN
  • Implement Device Mobility and Cisco Extension Mobility
  • Describe and implement CCD deployments

Prerequisites

  • Working knowledge of converged voice and data networks
  • Working knowledge of the MGCP, SIP, and H.323 protocols and their implementation on Cisco IOS gateways
  • Ability to configure and operate Cisco routers and switches
  • Ability to configure and operate Cisco Unified Communications Manager in a single-site environment

 Cisco Learning Credits: 34

Course Outline

Lesson 1. Multisite Deployments

  • Identifying Issues
  • Multisite Deployment Solutions
  • Multisite Connections
  • Multisite Deployment Dial Plan

Lesson 2. Centralized Call Processing Redundancy

  • Remote-Site Redundancy Options
  • Cisco Unified SRST and MGCP Fallback
  • CUCM Express in SRST Mode

Lesson 3. Bandwidth Management and Call Admission Control
Lesson 4. Features and Applications for Multisite Deployments

  • Device Mobility
  • Extension Mobility

Lesson 5. IP Telephony Security

  • Service Advertisement Framework

Labs

  • Implementing Basic Multisite Connections
  • Implementing a Dial Plan for International Multisite Deployments
  • Implementing SRST and MGCP Fallback
  • Implementing Cisco Unified Communications Manager Express in SRST Mode
  • Implementing Bandwidth Management
  • Implementing CAC
  • Implementing Device Mobility
  • Implementing Cisco Extension Mobility
  • Implementing Cisco SAF and CCD